I first needed to isolate the design from the digital mock-up the client sent me and size it to the text-block, which gave me an opportunity to extract the Moon Design and the Title/Author for the spine. I knew we needed a custom stamp for the spine, however, I initially thought I could carve the moon myself. Unfortunately, the carved moon design didn’t translate as well as I intended, so we decided to make a second stamp for that part. 

When I made the first draft it didn’t feel like the contrast of color was present, so I went back to the drawing board for another draft. I took my time with it, experimenting with different dyes and finishes that would stand out and give us the contrast we were looking for. Thankfully, I found a solution. Using a turquoise dye, I put down a base layer over the entire hide and let it dry overnight. I then focused on the border areas we wanted to emphasize and finished them with Atom Wax. Once that dried, I went over it again with an “Evening Blue” to give us the darker blue. For the final step, I applied a Japanese Gel Antique to smooth out the coloring and blend it all together. 

Once the coloring was completed I attached the boards. Before turning the edges in, I then punched holes for the studs. Since I don’t often work with these, I asked around to some of my colleagues for their advice. It’s always fun to collaborate with the community, whenever the chance arises. For this design aspect I chose to go with “Chicago Screws”, finding the exact size that matches the boards and leather thickness (approximately 4mm).